Exterior blinds

Sloped Exterior Blind Cetta 80F TE

The sloped blind is an ideal solution for shading asymmetrical window shapes, where the upper frame is not horizontal, but inclined under a specific angle. The aluminium slats copy the angle of the upper frame and are parallel to it. The slats are guided in a steel cord. The blind contains a special mechanism compensating for the different lengths of textile straps when sliding down and lifting the blind. The telescopic bottom rail is used to compensate for the different width of the blind in the lower position (window width) and the upper position (length of the window inclined part). Low roll height is achieved by using slats without longitudinal folds (Flexi system). Only the Cetta 80 slat and only the motor control can be used for the sloped blind.

I am interested in this product

Advantages

Benefits & advantages

solution for shading asymmetrical window shapes (upper frame is not horizontal, but inclined at a certain angle)
slats copy the angle of the upper frame and are parallel to it
the aluminium slats are guided in a steel string
a special mechanism compensating for the different lengths of textile straps when sliding down and lifting the blind
telescopic bottom slat, which is used to compensate for the different width of the bottom slat in the lower position (window width) and upper position (length of the sloping part of the window)
low height of the roll is achieved by using slats without a longitudinal fold of the slat

Get

Inspiration

Methods

Handling

electrically
remote control or power switch

Guaranteed

Dimensions

minimum width
600 mm

maximum width
2500 mm

maximum height
4000 mm

maximum area
7 m²

maximum angle
50°

* Note: As the width of the blind increases, its wind resistance class decreases - see Wind resistance, below on the page.

We do not produce atypical dimensions.

Technical parameters

	Upper profile	Lower profile	Slat	Side Guidance	Ladder	Textile strip
	Upper profile	Lower profile	Slat	Steel Wire	Ladder	Textile strip
Business name	P 001/2	P 012/6 + P 012/7	80 × 0,42	P 036 See Technical Manual	P 30/4 P30/5 P30/6 P30/7 104 × 85 74 × 85 93,5 × 85 83 × 85 PES	RHD 09 6 mm PES
Dimensions (mm)	58 × 60	21 × 80		Ø 3,2
Material	Al		Al	Fe / PVC
Cross-section
Colours	Standard: galvanized steel plate natural (Al profil) Other RAL colors sprayed, DECORAL*	Standard: anodized aluminum Other RAL colors sprayed, DECORAL*	According to current ISOTRA a.s. scheme	Standard: anodized Other RAL colors sprayed, DECORAL*	grey	black

Wind resistance

Essential characteristics	Performance
Wind resistance	Width of construction hole L (mm)	L <= 2 000		2 000 < L <= 2 500
	Standard EN/Beaufort	13659	Beaufort	13659	Beaufort
	Wind resistance class	2	5	1	4
	Max. wind speed v_max (km/h)	38		28
	Max. effective height wing	2 500
	Width of construction hole L (mm)	2 500		2 500
	Wind resistance class	1	4	0	3
	Max. wind speed v_max (km/h)	19		11
Max. effective height wing		4 000
Additional thermal resistance ΔR		0,08 (m².K/W)
Total solar energy transmittance g_tot		0,032 - 0,094 (according to chosen slat colour)*